Info Project
MONTANIER has developed many specific washing areas for its customers. Communities have been seeking MONTANER for years for the design and construction of vehicle wash areas.
Based on the feedback from MONTANIER's experiences for the different community sites, we apply the evolutions to our new equipment.
The BOM wash tracks and other vehicles are composed of various buried and aerial equipment, in a technical room and on the washing tracks.
A standard wash track for community vehicles is equipped with:
- 1 high access bridge, allowing washing of BOM roofs.
- 1 or 2 washing stations on automatic retractor, attached to a pole, allowing ergonomic work, at height.
- 1 low pressure washing station – high flow (cold water), ground with automatic hose retractors.
- 1 central gutter with a perpendicular gutter at the end of the runway, equipped with waste recovery bins. The weight and handling of these containers are studied to ensure the operator the best ergonomics.
- 1 EF undercast washing station (cold water) with 3 fixed ramps equipped with flat jet nozzles. This system consists of a horizontal ramp for undercast washing and 2 vertical ramps for washing bottom cases, wheels and sides.
- 1 foam projection system on vehicles to allow detergent to act.
- 1 product spray system to disinfect and/or decontaminate inside and outside vehicles.
- 1 or more remote control boxes, to control equipment.
- Side protection equipment against splashing, with the installation of tight, very resistant sheets.
- The provision and installation of a modular technical bungalow, when you do not have an existing technical room.
The washing station is often equipped with a MONTANIER water treatment system in order to re-use washing water and thus reduce water consumption by more than 80%.
