Washing area for dumpsters and other vehicles

MONTANIER has developed many specific washing areas for its customers. Communities have been asking MONTANER for years for the design and construction of washing areas for their vehicles.

Based on feedback from MONTANIER for the various community sites, we apply the changes to our new equipment.

The BOM washing tracks and other vehicles are composed of various buried and aerial equipment, in a technical room and on the washing tracks.

A typical washing lane for community vehicles is equipped with:

• 1 access walkway at height, allowing the washing of the BOM roofs.
• 1 or 2 washing stations on automatic reel, fixed on a post, allowing ergonomic work, at height.
• 1 low-pressure washing station – high flow rate (cold water), on the ground with automatic hose reels.
• 1 central gutter with a perpendicular gutter at the end of the track, equipped with a waste recovery bin. The weight and handling of these bins are studied to ensure the best ergonomics for the operator.
• 1 EF under-chassis washing station (cold water) with 3 fixed ramps equipped with flat jet nozzles. This system is made up of a horizontal ramp for washing the underframe and 2 vertical ramps for washing the underbody, wheels and sides.
• 1 foam projection system on the vehicles to allow the detergent to act.
• 1 product spraying system to disinfect and/or decontaminate the interior and exterior of vehicles.
• 1 or more remote control boxes, to control the equipment.
• Equipment for side protection against splashes, with the installation of stretched, very resistant tarpaulins.
• The supply and installation of a modular technical bungalow, when you do not have an existing technical room.

The washing station is often equipped with a MONTANIER water treatment system in order to be able to reuse the washing water and thus reduce water consumption by more than 80%.