Internal and external washing of drums and conges 30L to 220L.
Do you have trouble cleaning and degreasing inside your drums? To effectively disinfect your drums, we have designed a machine that starts a system of powerful rotating head, lava inside your barrel. Inclined at 45, the can doesn't fill. Thus, the jets inside the container, degreased and sanitized all the inner walls of the drum. Fast and easy to use, you will save valuable time.
TETRA LF, high pressure washer ensures the internal washing of containers with full opening from 30L with speed and efficiency by optimizing working conditions. Plastic containers such as stainless steel containers can be installed.
The 45° tilt allows easy installation of heavy containers and optimised ergonomics, the positioning of the drum tilted on guide rollers facilitating the evacuation of used water. A presence detector was used to ensure that the cycle could start only with a drum in the correct position. The high pressure rotary head Motorized generates 360° jets impacting surfaces. Washing is done by automated cycle with detergent. This HP washing system reduces water consumption and discharges.
- Technical specifications
| Model | LF-220. E (excluding option) |
LF-220.S (excluding option) |
|---|---|---|
| Energy | 230V - 50Hz - 1.5 kW | 400V+N+T – 3 kW |
| Max flow rate | 13 L/min | 15 L/min |
| Pressure | 60 bar | 80 bar |
| Sun. (L x l x h) |
1400 x 750 x 1500 mm | 1400 x 750 x 1500 mm |
| PTC MAX weight | 250 Kg | 250 Kg |
| Drums | Standard drums 30L to 220L | Standard drums 30L to 220L |
| Number used | 2 | 2 |
| Hot water | 55°C max. | 55°C max. |
| Finish | Range E | Standard |
| Standard deadlines | 10 weeks | 12 weeks |
- Key points
Internal washing of drums from 30L to 220L using a high-pressure rotating head impacting at 360° the surfaces of each drum
Build and wash enclosure made of 304L stainless steel with inclined design to ensure effective gravitational flow during washing.
Installation plan and ergonomic rollers to facilitate the introduction and exit of large diameter drums. A support chair is provided for smaller drums
Pipes and components in contact with stainless steel rinse water with respect to slopes to ensure a gravitational flow.
Injection of product by dosing pump. Integrated contact time. (excluding LF-220-EG)
4 possible options: compressed air purging, injection 1 additional product, stainless steel 316L
