• Automatic car wash jib
  • Washing boom for truck and vehicle washing area
Range: TERRA POT
All sectors


Washing jib for washing vehicles.

 

Indispensable in vehicle washing, the jib crane with its articulated washing arm makes it possible to actively clean cars, trucks and motorcycles. Parked below the gallows, the user uses the gun to wash his vehicle himself. These imposing arms make it possible to clean long vehicles and especially the chassis, up to the top of the vehicle. We manufacture and install these washing jibs for washing areas and washing stations.

Discreet, these vertical brackets fit easily into the landscape . The washing system is easy to use. Extremely handy and equipped with an intuitive interface, the washing jib is suitable for use by the general public.

We offer different models depending on the heights and operating pressures. The structure is made of hot-dip galvanized steel, an access hatch is placed on the front face. The jib allows accessibility, thanks to the fixed primary arm and the 360° pivoting secondary arm, allowing free movement around vehicles when washing them.

 

Indoor or outdoor installation

 

The washing jib can be installed indoors and outdoors, especially on washing areas with small surfaces, in no way hindering the passage of vehicles. TERRA POT is fed by a high pressure network. A high pressure unit, type TERRA BL.

Finally, the device with its robust materials, is able to withstand heavy daily use for several years.

 

 

CONTACT US
  • Technical characteristics
Model TERRA POT3
(not optional)		 TERRA POT4
(not optional)		 TERRA POT61
(not optional)		 TERRA POT63
(not optional)
MAX Flow 15L/min 15L/min 15L/min 30L/min
Pressure 150 Bar 150 Bar 150 Bar 300 Bar
MAX GVW weight 150kg 250kg 500kg 500kg
Matter Galva or stainless steel Galva or stainless steel Galva or stainless steel Galva or stainless steel
flexible 3/8’’ 3/8’’ ½’’ ½’’
mast height 2.50m 4.50m 6.00m 6.00m
mast section 100x100mm 100x100mm 200x200mm 200x200mm
Primary arm Fixed Long 2.15 m Fixed Long 4.50 m or 3 m Swivel 180° Long 4.50 m or 3 m Swivel 180° Long 4.50 m or 3 m
Secondary arm Without 360° swivel Length 2.50 m 360° swivel Length 2.50 m 360° swivel Length 2.50 m
Lance in the wash 1 1 1 1
Standard deadlines 6 weeks 6 weeks 6 weeks 6 weeks
  • Key points

The TERRA POT provides optimal ergonomics for positioning the washing head in your washing tubs. It is also widely used outdoors for washing hoppers, for example.

Mechanically welded frame in hot-dip galvanized steel. Dedicated technical enclosure accessible by access hatch on the front. The TERRA POT can be placed both indoors and outdoors. The TERRA POT is powered by your high pressure network. Stainless steel lance support

6 options: double jib crane on 1 mast, secondary arm length 3.50m, washing head, raising/lowering pneumatic cylinder, electric hoist, load balancer.