Internal washing of drums and conges 30L to 220L per high pressure rotating head.
- Technical specifications
| Model | LF-220.EG (excluding option) |
LF-220.S (excluding option) |
LF-220.P (excluding option) |
|---|---|---|---|
| Energy | 230V - 50Hz 1.5kW | 400V+N+T – 3 kW | 400V+N+T – 3 kW |
| Max flow rate | 13 L/min | 15 L/min | 15 L/min |
| Pressure | 60 bar | 80 bar | 80 bar |
| Sun. (L x l x h) |
1400 x 750 x 1500 mm | 1400 x 750 x 1500 mm | 1400 x 750 x 1500 mm |
| PTC MAX weight | 250 Kg | 250 Kg | 250 Kg |
| Drums | Standard drums 30L to 220L | Standard drums 30L to 220L | Standard drums 30L to 220L |
| Number used | 1 | 2 | 2 |
| Hot water | 55°C max. | 55°C max. | 55°C max. |
| Finish | Entry to Range | Standard | Pharma |
| Standard deadlines | 10 weeks | 12 weeks | 14 weeks |
- Key points
Internal washing of drums from 30L to 220L by means of a high-pressure rotating head impacting at 360° the inner surfaces of each drum.
Build and wash enclosure made of 304L stainless steel with inclined design to ensure effective gravitational flow during washing.
Installation plan and ergonomic rollers to facilitate the introduction and exit of large diameter drums. A support chair is provided for smaller drums.
Pipes and components in contact with stainless steel rinse water with respect to slopes to ensure a gravitational flow.
Injection of product by dosing pump. Integrated contact time. (Outside LF-220-EG)
4 possible options: sealing door, compressed air purging, injection 1 additional product, stainless steel 316L.
