Unsere Spezialitäten – Verkehrssektor

Wasseraufbereitung

Drehkopf-Fahrgestellscheibe

Montanier hat mit der rotierenden Kopf Chassisscheibe, bestehend aus 3 Waschköpfen, innoviert. Sie decken einen Bereich von etwa 2,20 m x 2,00 m in Form eines Dreiecks ab. Dieses System bietet den Vorteil, vielseitig zu sein, insbesondere zum Waschen auf Parade. Auch die Einbettung im Boden ist langsam. Dies ermöglicht es, besser in den vorhandenen Standort integriert und das Abwasser zu evakuieren. Wir liefern den zu versiegelnden Rahmen in feuerverzinktem Stahl an den Pflaster, so dass er in die Mauerwerk integriert werden kann. Um eine bessere Führung zu erhalten, installieren wir ein paar Führungsradführungen und begrenzen die Gefahr, die Reifen zu klemmen. Um ein ausgezeichnetes Waschergebnis zu gewährleisten, rüsten wir die Köpfe mit Hochdruckdüsen aus. Diese Ausrüstung ermöglicht eine kräftige Waschung, die eine breite Oberfläche bedeckt. Es umgibt auch jede "Schablone" Wirkung, die die Waschqualität beeinflusst. Diese Düsen sind auch die Garantie, nicht zu schädigen Häuser und andere zerbrechliche Ausrüstung unter dem Chassis. Die Waschrampe wird von einem verstärkten HP Schlauch gespeist. Dieser Schlauch durchläuft den Boden, in einer Wärme bis in den technischen Raum. Unsere Teams verbinden sie mit der Hochdruckeinheit mit den notwendigen Ventilen. Ein spezifisches Gitter in feuerverzinktem Stahl wird auf Winkeln zwischen den Köpfen hergestellt.

Chassis Waschmaschine

Our R&D teams have developed a chassis washer. In order to improve the quality of vehicle washing, without slowing down the washing rate, we recommend setting up a chassis + underbody + wheel washing system operating in the parade. Cold water under-chassis washing station 300 L/min at 20 bars, comprising 3 fixed ramps equipped with flat jet nozzles. We complete this system with a horizontal ramp for under-frame washing. We have also provided it with 2 vertical ramps for washing the underbody, wheels and sides of vehicles. This system makes it possible to wash the lower parts of the vehicle (often soiled by earth and other particles) before the brush tunnel or gantry, thus avoiding scratches on the bodywork and offering an excellent quality wash.

Bus Waschtunnel

The bus washing tunnel is a fixed piece of equipment designed for washing in the process. Our teams hot-dip galvanize the entire structure. This system allows it to be installed indoors and outdoors. We guarantee longevity and reliability thanks to many mechanical components made of stainless steel. Four side brushes and a roof brush make up this washing tunnel. Our R&D team has thought about making maintenance easier. It has thus equipped the tunnel with high-density brushes with extruded and grained HDPE wire, shell with simplified single-point closure. We can thus ensure that the approximate lifespan of this equipment is 50,000 washes. The rotation of the brushes and the inclination of the ramps with respect to the direction of passage causes the opening and closing of the brushes when they come into contact with the walls of the vehicle. At the entrance to the tunnel, we install a roof brush integrated in an additional box. The rotation of the brush on the bodywork as the bus passes causes it to rise and press constantly on the entire roof of the vehicle. Three PVC arches, equipped with removable flat jet nozzles, ensure the distribution of water. Our teams then complete these arches with 2 vertical ramps and 1 horizontal ramp, fixed to the structure.

Waschhandschuh

The Stop & Go is a mobile equipment designed for washing buses. This gate is a Montanier innovation. Our teams fully hot-dip galvanize its structure. This system allows its installation both indoors and outdoors. Because it is completely streamlined, we thus protect the organs from bad weather. We equip the washing gantry with two side brushes and a roof brush. To ensure this whole system, we install the two side brushes suspended from motorized trolleys. They move on a ramp. They provide front and rear washing by double sweeping, as well as side washing. The horizontal roof brush is mounted on a vertical rail, and the raising-lowering is carried out via a geared motor and a chain link. We have developed a device of geared motors, controlled by intensity sensors, which control the opening and closing of the brushes. Thanks to this ingenious system, the support is therefore permanently adjusted, depending on the effort that the brushes encounter. The rotation takes place in the direction of passage of the vehicle (which in particular preserves the roof equipment). Our washing gantry ensures the distribution of water thanks to two PVC arches. We equip these arches with flat jet sprinklers.