Washing area for garbage trucks and other vehicles

MONTANER has developed numerous specific washing areas for its clients. Local authorities have been calling on MONTANER for years for the design and construction of their vehicle washing areas.

Based on feedback from MONTANIER's experience with the various community sites, we apply the improvements to our new equipment.

The wash bays for BOM and other vehicles consist of various underground and above-ground equipment, in a technical room and on the wash bays.

A typical vehicle wash bay for local authorities is equipped with:

• 1 elevated access walkway, allowing the washing of the roofs of the BOMs.
• 1 or 2 washing stations on automatic reel, fixed on a post, allowing ergonomic work at height.
• 1 Low Pressure – High Flow (cold water) washing station, on the floor with automatic hose reels.
• One central drainage channel with a perpendicular channel at the end of the track, equipped with waste collection bins. The weight and handling of these bins are designed to ensure optimal ergonomics for the operator.
• 1 EF (cold water) underbody wash station with 3 fixed ramps equipped with flat jet nozzles. This system consists of one horizontal ramp for underbody washing and 2 vertical ramps for washing the sills, wheels and sides.
• 1 foam projection system on vehicles to allow the detergent to act.
• 1 product spraying system for disinfecting and/or decontaminating the interior and exterior of vehicles.
• One or more remote control units, to operate the equipment.
• Side splash protection equipment, with the installation of highly resistant stretched tarpaulins.
• The supply and installation of a modular technical bungalow, when you do not have an existing technical room.

The car wash station is often equipped with a MONTANIER water treatment system in order to reuse the wash water and thus reduce water consumption by more than 80%.