Interior and exterior washing of 30L to 220L drums and freezers.
Are you having trouble cleaning and degreasing the inside of your drums? To effectively disinfect your drums, we've designed a machine that uses a powerful rotating head to wash the inside of your drum. Tilted at a 45-degree angle, the drum doesn't fill up. The jets inside the container degrease and sanitize all the internal walls of the drum. Quick and easy to use, it will save you valuable time.
The TETRA LF high-pressure washer ensures the rapid and efficient internal cleaning of fully opening containers from 30L upwards, optimizing working conditions. It can handle both plastic and stainless steel containers.
The 45° tilt allows for easy placement of heavy containers and optimized ergonomics. Positioning the inclined drum on guide rollers facilitates wastewater drainage. A drum presence detector ensures safety by only allowing the cycle to start when the drum is correctly positioned. The high-pressure rotating head generates 360° jets that impact surfaces. Washing is performed via an automated cycle using detergent. This high-pressure washing system reduces water consumption and wastewater discharge.
- Technical specifications
| Model | LF-220.E (without option) |
LF-220.S (without option) |
|---|---|---|
| Energy | 230V - 50Hz - 1.5 kW | 400V+N+T – 3 kW |
| MAXIMUM flow rate | 13 L/min | 15 L/min |
| Pressure | 60 bar | 80 bar |
| Dimensions (L x W x H) |
1400 x 750 x 1500 mm | 1400 x 750 x 1500 mm |
| Maximum Gross Vehicle Weight | 250 kg | 250 kg |
| Barrels | Standard drums from 30L to 220L | Standard drums from 30L to 220L |
| Number used | 2 | 2 |
| Hot water | 55°C max | 55°C max |
| Finishing | E Series | Standard |
| Standard lead times | 10 weeks | 12 weeks |
- Key points
Internal washing of 30L to 220L drums using a high-pressure rotating head that impacts the surfaces of each drum 360°
The frame and washing chamber are made of 304L stainless steel with an inclined design to ensure efficient gravity flow during washing.
Ergonomic placement platform and rollers facilitate the insertion and removal of large-diameter drums. A support chair is provided for smaller-diameter drums
Pipes and components in contact with rinsing water made of stainless steel with respect to slopes to ensure gravity flow.
Product injection via metering pump. Integrated contact time. (excluding LF-220-EG)
4 possible options: compressed air purge, injection of 1 additional product, 316L stainless steel
+33 2 41 67 11 11







